Figure 61. Return (under) conveyor drive belt guard, removal and installation (Model 5230D).
SECTION XVII. MAIN (FEED) CONVEYOR ASSEMBLY
The main (feed) conveyor assembly conveys aggregate from the feeder hopper and roll elevator to the
vibrator screen assembly. The main (feed) conveyor is driven by an electric motor. Power is transmitted from
the electric motor to the main (feed) conveyor by two V-belts.
Main (Feed) Conveyor Drive Belts Adjustment
Remove the main (feed) conveyor drive belt guard from the unit (fig. 62).
Adjust the main (feed) conveyor drive belts in the same manner as the feeder drive belts (fig. 58).
Install the main (feed) conveyor drive belt guard on the unit in reverse of the instructions on figure 62.