Figure 10. Pan feeder knee braces.
Disconnect the hydraulic hoist from the pan feeder (fig. 11). Turn the valve handle on the hydraulic pump
counterclockwise to the OPEN position (fig. 7) and allow the hydraulic hoist to return to the lowered position.
Use a suitable lifting device and lift the discharge conveyor into operating position (fig. 12). Install the discharge
conveyor support frame and head belt scraper (figs. 12 and 13). Adjust main conveyor drive belt (para 79).
Raise and secure the operator's platform guard rails (fig. 14).
Figure 11. Hydraulic hoist, installed view.