CONTINENTAL MODEL SD802
LUBRICATE IN ACCORDANCE WITH CURRENT LUBRICATION ORDER
AIR CLEANER. Check to see if red signal is visible.
LUBRICATING SYSTEM. Check engine oil level. Add oil to
correct level. Correct lubricant leaks. Lubricate in
accordance with current LO.
FUEL SYSTEM. Drain water and sediment from fuel filters
and check for dirty elements. Every 1000 hours check
governor adjustment. Proper governed speed is 1,400 rpm.
Correct fuel leaks.
COOLING SYSTEM. Check coolant level. Fill to 2 inches
below filler neck. Check for correct antifreeze solution.
Clean radiator air passages and correct all coolant leaks.
FAN BELTS. Check for excessive wear or frayed condition
and proper tension. Correct tension is 3/4 to 1 inch
ENGINE ELECTRICAL SYSTEM. Check starter, generator, and
regulator for proper operation. Every 1000 hours check
generator brushes. Check battery electrolyte level and
specific gravity. Fill to 3/8 inch above plates. In
freezing weather run engine for I hour after adding
water. Tighten all loose connections. Replace defec-
tive wiring. Proper belt deflection is 3/4 to 1 inch.