(2) Store basic issue items and disassembled
components subject to damage or
e. Depreservation Guide.
the items in a suitable container and place
with the lubrication and servicing unit to
o. Weatherproofing. When covered storage is not
available, select a firm, level, well drained storage
i. Fuel Tank, Mobile. Tanks will be drained and
location protected from prevailing winds. Position the
sprayed or fogged with type P-10, grade 2, engine
equipment on heavy planking or other solid surfaces.
Block the equipment in a manner to remove all weight
from tires. Cover the equipment with a tarpaulin or
other suitable waterproof covering and tie down
k. Batteries and Cables.
188. Inspection and Maintenance of Roll Crusher in
l. Pneumatic Tires. Pneumatic tires standing in
storage under load will be inflated to 100 psi. When the
When the roll crusher has been placed in limited
equipment is blocked and all weight is removed from the
storage all scheduled preventive maintenance services,
tires, deflate tires to two-thirds normal tire pressure.
including inspection, will be suspended. Refer to AR
743-05. Inspect the roll crusher as outlined in paragraph
n. Disassembly, Disassembled Parts, Basic Issue
185b. Operate it long enough to reach operating
temperature and completely lubricate all bearings,
(1) Disassembly normally is not necessary for
gears, and the like. Represerve the roll crusher after
storage; disassembly will be limited to
removal of parts that Interfere with
storage or may be subject to damage or