Figure 58. Wheel bearing and hub assembly, exploded view.
b. Cleaning and Inspection. Clean and inspect the drawbar for damage. Replace if necessary.
c. Installation.
(1) Install the drawbar in reverse of instructions on figure 59.
(2) Install Flexo-Stick assembly on the drawbar (TM 5-3820-205-10/2).
119. Lunette
a. Removal. Remove the lunette as instructed on figure 59.
b. Cleaning and Inspection. Clean and inspect the lunette for wear. Replace if necessary.
c. Installation. Install the lunette in reverse of instructions on figure 59.
a. Removal. Remove reflectors as instructed on figure 53.
b. Cleaning and Inspection. Clean and inspect reflectors for damage. Replace damaged reflectors as
necessary.
c. Installation. Install the reflector in reverse of instructions on figure 53.
121. Safety Chains
a. Removal. Remove the safety chains as instructed on figure 59.
b. Cleaning, Inspection, and Repair. Clean and inspect the safety chains for wear and damage.
Repair by welding, or use repair links or suitable heavy clevises.
c. Installation. Install the safety chains in reverse of instructions on figure 59.
79