TM 5-3820-233-35/2
Figure 21-2. Rocker wren and shaft, exploded view.
The oil pan serves as a reservoir for the engine
f. Installation
lubricating system and as a housing for the lower
internal engine parts. A gasket is located between the
cylinder head.
pan and the cylinder block to prevent loss of oil.
(2) Complete the cylinder head installation by
b. Removal
reversing the instructions outlined under "Cylinder Head
Removal."
(2) Drain the oil (Operator's Manual).
(3) Adjust the exhaust valves and time the
injectors (Operator's Manual).
(3) Remove bolts, gasket, and oil pan from
the engine block.
44.
Engine Oil Pan
c. Disassembly.
a. General. The engine oil pan is located at the
disassemble the oil pan assembly.
bottom of the engine and is secured by twenty six bolts.
3-28