3208 INDUSTRIAL AND MARINE ENGINES
DISASSEMBLY AND ASSEMBLY
1. Put 5H2471 Gasket Cement on both sides of
gasket (2). Install the gasket on housing (1).
2. Install inner sleeve (3) in the housing.
3. Put piston (6) in position next to the side of
diaphragm (4) that has identification "PISTON
4. Put retainer (5) in the diaphragm.
5. Put the screw through sleeve (7), retainer,
diaphragm, and the piston.
6. Install spacer (8), washer, and nut (9) on the
7. Put 5H2471 Gasket Cement on the contact
surfaces of the diaphragm. Install the sleeve,
retainer, diaphragm, and piston in the inner
sleeve and housing.
8. Put the spring and cover in position on the
housing and install the screws that hold the
cover in place.