Remove low gear inner bearing.
Remove front bearing retainer ring
Remove clutch piston return spring. A sleeve with a portion
removed is recommended for removing the clutch piston
return spring, washer, and retainer ring. Sleeve shown is a
common pipe, with a 1-1/2 x 1 [39,0x26,0mm] opening.
The pipe is 6x3-1/4x2-3/4 [155,0x85,0x78,0mm].
Compress spring retainer washer. Through opening
remove spring retainer snap ring. Release tension on
spring retainer. Remove spring retainer and spring. Turn
clutch over and tap clutch shaft on a block of wood to
Remove front bearing.
remove clutch piston.
Forward and 2nd Clutch Disassembly
Remove clutch shaft piston rings.
Remove front bearing locating ring.