CHECK FAN HUB AND FAN MOUNTING for damage
CHANGE OIL after machine operation and oil is at
operating temperature. Remove plug at bottom of axle
housing and allow lubricant to drain. Rotate wheel until
in SERVICE MANUAL.
planetary filler hole is at the lowest position, remove plug
and allow to drain. Replace drain plugs and fill with a light
flushing oil. Operate axles for a short period of time, then
replacing if necessary.
drain. Inspect the magnetic drain plug for foreign particles
CHECK EXHAUST SYSTEM AND CONNECTIONS for
indicative of wear or possible failure. Replace drains
leaks or component damage.
plugs and refill with clean oil (refer to LUBRICANTS
DRAIN AND CLEAN FUEL TANK every 800 hours. After
SPECIFICATION CHART). Be sure thrust cap oil level is
draining fuel into container, remove sediment from
in proper position when refilling planetary.
bottom of tank. Flush tank with diesel fuel and then refill
with clean fuel (refer to LUBRICANTS SPECIFICATION
ADJUST WHEEL HUB BEARING PRELOAD
(refer to SERVICE MANUAL).
COMPLETE ALL SERVICE FUNCTIONS as indicated in
engine vendor manual.
CHECK DIFFERENTIAL FLANGE BEARING
END PLAY (refer to SERVICE MANUAL).
ADJUST BRAKE (refer to vendor transmission manual in
INSPECT FRAME AND DOZER WELDMENTS for cracks
or noticeable damage. Structural damage should be
repaired immediately to prevent further damage.