OPERATOR/CREW PREVENTIVE MAINTENANCE CHECKS AND SERVICES
ITEMS TO BE INSPECTED
PROCEDURE: Check for and have repaired, filled or
Equipment is not ready/
adjusted as needed.
Check coolant level. Add coolant as required (Level should be
1/2 inch from bottom of filler neck).
BRAKE MASTER CYLINDER
Check brake cylinder fluid level. Add as required.
a. Check air cleaner indicator. If red, clean or replace air
b. Inspect air cleaner element.
Check for frayed, cracked, or broken belts
Check differential and planetary oil level (allow 5 min for
oil to settle).
CONTROLS AND INSTRUMENTS
a. Engine water temperature gauge (normal operating tempera-
If any are not within normal
b. Engine oil pressure gauge (Idle 10-25 psi, rated speed
2800 RPM) 45-75 psi).
Converter "out" oil pressure gauge (25-70 psi).
d. Transmission oil temperature gauge (180-250° F).