TM 5-3820-205-24P-1
used in the breakout shown on the illustration figure, which is prepared for a functional group, subfunctional group, or an assembly. A "V" appearing in this
column in lieu of a quantity indicates that the quantity is variable and the quantity may vary from application to application.
4. Explanation of Columns (Section IV).
a. NATIONAL STOCK NUMBER (NSN) INDEX.
(1) STOCK NUMBER column. This column lists the NSN by National Item Identification Number (NIIN) sequence. The NIIN consists of the last
NSN
nine digits of the NSN (i.e., 5305-01-674-1467 ). When using this column to locate an item, ignore the first 4 digits of the NSN. However, the complete NSN
NIIN
should be used when ordering items by stock number.
(2) FIG. column. This column lists the number of the figure where the item is identified/located. The figures are in numerical order in Section II and
Section III.
(3) ITEM column. The item number identifies the item associated with the figure listed in the adjacent FIG. column. This item is also identified by
the NSN listed on the same line.
b. PART NUMBER INDEX. Part numbers in this index are listed by part number in
ascending alphanumeric sequence (i.e., vertical arrangement of
letter and number combination which places the first letter or digit of each group in order A through Z, followed by the numbers 0 through 9 and each following
letter or digit in like order).
(1) CAGEC column. The (CAGE) Commercial and Government Entity Code (C) is a 5-digit alphanumeric code used to identify the manufacturer,
distributor, or Government agency, etc., that supplies the item.
(2) PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm, corporation, or Government activity), which
controls the design and characteristics of the item by means of its engineering drawings, specifications standards, and inspection requirements to identify an
item or range of items.
(3) STOCK NUMBER column. This column lists the NSN for the associated part number and manufacturer identified in the PART NUMBER and
CAGE columns to the left.
(4) FIG. column. This column lists the number of the figure where t
he item is identified/located in Section II and Ill.
(5) ITEM column. The item number is that number assigned to the item as it appears in the figure referenced in the adjacent figure number column.
c. FIGURE AND ITEM NUMBER INDEX.
(1) FIG. column. This column lists the number of the figure where the item is identified/located in Sections II and Ill.
(2) ITEM column. The item number is that number assigned to the item as it appears in the figure referenced in the adjacent figure number
column.
(3) STOCK NUMBER column. This column lists the NSN for the item.
(4) CAGEC column. The Commercial and Government Entity (CAGE) Code (C) is-a 5-digit alphanumeric code used to identify the manufacturer,
distributor, or Government agency, etc., that supplies the item.
(5) PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm, corporation, or Government activity), which
controls the design and characteristics of the item by means of its engineering drawings, specifications standards and inspection requirements to identify an
item or range of items.
5. Special Information.
a. USABLE ON CODE. The usable on code appears in the lower left corner of the Description column heading. Usable on codes are shown as "UOC:
.........." in the Description column (justified left) on the first line following applicable item description/nomenclature. Uncoded items are applicable to all models.
Identification of the usable on codes used in the RPSTL are:
Code
Used On
ARG
5230B
ARH
5230D
XAB
5230C
b. FABRICATION INSTRUCTIONS. Bulk materials required to manufacture items are listed in the Bulk Material Functional Group of this RPSTL. Part
numbers for bulk materials are also referenced in the Description column of the line item entry for the item to be manufactured/fabricated. Detailed fabrication
instructions for items source coded to be manufactured or fabricated are found in
TM 5-3820-205-20-1 and TM5-3820-205-35-1.
4
