TM 5-3820-205-24P-2
UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT
MAINTENANCE REPAIR PARTS AND
SPECIAL TOOLS LISTS
SECTION I. INTRODUCTION
1. Scope.
This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnostic
equipment (TMDE); and other special support equipment required for performance of Unit Maintenance, Direct Support
and General Support Maintenance of the Jaw Crusher. It authorizes the requisitioning, issue, and disposition of
spares, repair parts and special tools as indicated by the source, maintenance and recoverability (SMR) codes.
2. General.
In addition to Section 1. Introduction, this Repair Parts and Special Tools List is divided into the following sections:
a. Section II. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the
performance of maintenance. The list also includes parts which must be removed for replacement of the authorized
parts. Parts lists are composed of functional groups in ascending alphanumeric sequence, with the parts in each group
listed in ascending figure and item number sequence. Bulk materials are listed in item name sequence. Repair kits are
listed separately in their own functional group within Section i. Repair parts for reparable special tools are also listed in
the section. Items listed are shown on the associated illustration (s) /figure (s).
b. Section III. Special Tools List. A list of special tools, special TMDE, and other special support equipment
authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in DESCRIPTION AND USABLE ON CODE
column) for the performance of maintenance.
c. Section IV. Cross-reference Indexes. A list, in National Item Identification Number (NIIN) sequence, of all
National stock numbered items appearing in the listing, followed by a list in alphanumeric sequence of ail part numbers
appearing; in the listings. National stock numbers and part numbers are cross-referenced to each illustration
figure and item number appearance. The figure and item number index lists figure and item numbers in alphanumeric
sequence and cross-references, NSN, CAGE, and part numbers.
3. Explanation of Columns (Sections 11 and 111).
a. ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration.
b. SMR CODE (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-position code
containing supply/requisitioning information, maintenance category authorization criteria, and disposition instructions,
as shown in the following breakout:
Source Code
1st two positions
XXxxx
How you get an item.
Maintenance Code
xxXXx
3d position
4th position
Who can install,
replace, or
Who can do complete
use the item.
repair on the item.
Recoverability Code
5th position
xxxxX
Who determines disposition action
on an unserviceable item.
*Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenance tasks of the
"Repair" function in a use/user environment in order to restore serviceability to a failed item.
(1) Source Code. The source code tells you how to get an item needed for maintenance, repair, or overhaul of an
end item/equipment. Explanations of source codes follows:
1
