TM 5-3820-205-10-1
(8) Vibrating screen identification. Located al the right of the vibrating screen assembly be hind the vibrating
screen motor. Provides the manufacturer, serial number, and maximum speed.
(9) Vibrating screen motor identification plate. Located on the vibrating screen motor housing Provides the
manufacturer, model, and serial numbers and amps, volts, and cycles.
(10) Main (feed) conveyor motor identification plate. Located on the conveyor motor housing. Provides the
manufacturer, model, and serial numbers and amps, volts, and cycles.
(11) Main (feed) conveyor gear reducer identification plate. Located on the conveyor gear reducer housing.
Provides the manufacturer, class, horsepower, and ratio.
(12) Rotary elevator and return (under) conveyor gear reducer identification plate. Located on the rotary
elevator gear reducer housing. Provides the manufacturer, class, horsepower, and ratio.
(13) Feeder gear reducer identification plate. Located on the feeder gear reducer housing. Provides the
manufacturer, class, horsepower, and ratio.
(14) Main control panel identification and data plate. Located inside the main control panel on the upper left-
hand carrier. Provides the manufacturer, volts, phase, cycles, and serial number.
(15) Main control panel caution plate. Located on the outside of the main control panel door. It states that a
suitable ground rod and lead shall be installed at the power source before using the receptacles.
b. Tabulated Data.
(1) General
Manufacturer............................ Eagle Crusher Co., Inc.
Model ....................................... 5230s, 5230C, and 5230D
Type ......................................... Roll Crusher
Plant unit function .................... Secondary
Towing speeds:
Over the road
maximum ........................... 20 mph (miles per hour)
Cross-country maximum.... 10 mph
(2) Engine
Manufacturer............................ Cummins Engine Co., Inc.
Model ....................................... N855/P235
Specification number ............... DS-4217
Type ......................................... Diesel
Cycle ........................................ 4
Number of cylinders ................. 6
Rated horsepower .................... 195hp (horsepower) at 1800 rpm
(revolutions per minute)
Oil pressure ............................. 50-70psi(pounds per square inch)
at 1800 rpm
Brake horsepower .................... 235 hp at 2100 rpm Cooling
system:
Type................................. Iiquid
Temperature range .......... 175°F-195°F
Electrical System:
Operating voltage............. 24 volts
Number of batteries ......... 4 (series parallel connected)
Type of batteries .............. Storage, 12 volt, 6 cell (type
designation 6TN)
Type of ground................. Negative
Air cleaner-type ........................ Dry
Clutch-type............................... Friction, dry, positive-action
(3) Roll crusher assembly
Manufacturer............................ Eagle Crusher Co., Inc.
Model ....................................... 24 x 30
Size of discharge opening........ 1/4-3 in.
Revolutions per minute
(mainshaft speed)............ 300
(4) Vibrating screen assembly
Manufacturer............................ Allis-Chalmers Manufacturing Co.
Model ........................................S
Type .........................................Ripl-flo
Size .........................................4 x 10 DD
Maximum speed........................900 rpm
(5) Reciprocating feeder
Manufacturer ............................Eagle Crusher Co., Inc.
Model ........................................4517 (Models 5230B, 5230C) and
4517A (Model 5230D)
Capacity (24 in.)........................175 tph (tons per hour)
(6) Rotary elevator
Manufacturer ............................Eagle Crusher Co., Inc.
Model ........................................4601 (Models 5230B, 5230C) and
4601B (Model 5230D)
Size .........................................72 in. die (diameter) x 24 in. w
(wide)
(7) Main (feed) conveyor
Manufacturer ............................Eagle Crusher Co., Inc.
Model ........................................5031 (Models 5230B 5230C) and
5031A (Model 5230D)
Capacity....................................175 tph
Belt width ..................................24 in.
(8) Return (under) conveyor
Manufacturer ............................Eagle Crusher Co., Inc;
Model ........................................30288 (Models 5230B, 5230C) and
4715 (Model 5230D)
Capacity....................................175 tph
(9) Trailer
Manufacturer ............................Fruehauf Trailer Co.
Model ........................................Secondary trailers
(10) Dolly
Manufacturer ............................Fruehauf Trailer Co.
Model ........................................5930 (Models 5230B, 5230C) and
5930B (Model 5230D)
(11) Feeder, return (under) conveyor, and
rotary elevator motors
Manufacturer ............................General Electric Corp.
Model ........................................5KG215BG202
Type .........................................KG
Horsepower ..............................5
Revolutions per minute .............1745
5
