Figure 4-5. Adjusting valve clearance.
4-15. Primary and Secondary Fuel Filter
(2) Inspect lines for dents or beaks. Replace a
a. Removal. Refer to , gure 4-6 and remove the
primary and secondary fuel filter as follows:
(1) Drain the fuel from primary and secondary.
(1) Refer to figure 4-6 and install the primary and
(2) Disconnect the fuel lines.
secondary fuel filter.
(3) Remove primary and secondary fuel filter from
(2) Install a new filter element as described in
(1) Inspect the mounting hardware for damage or