Remove the inner and outer brake disc.
Remove the brake housing adaptor plate place bolts, and
lower hole stud nuts and washers. (See page 8 for brake
Remove adaptor plate.
Remove the disc housing to adaptor plate bolts.
CLEANING AND INSPECTION
Clean all parts thoroughly using solvent type cleaning fluid.
It is recommended that parts be immersed in cleaning fluid
and moved up and down slowly until all old lubricant and
foreign material is dissolved and parts are thoroughly
CAUTION: Care should be exercised to avoid skin rashes,
fire hazards and inhalation of vapors when using solvent
The importance of careful and thorough inspection of all
parts cannot be overstressed. Replacement of all parts
Remove disc housing.