TM 5-3820-233-35/1
(4) Remove inner belt and inner fly-
i. Remove conveyor skirtboard and fold
wheel guards (Operator's Manual).
conveyor.
(5) Remove the crusher-to-power unit
24. Power Unit
and crusher-to-feeder countershaft drive belts
(operator's Manual).
a. Removal
(6) Remove crusher hopper and walkway
(1) Disconnect fuel lines from the power
platform (Operator's Manual).
unit (Operator's Manual).
(7) Refer to figure 4 and remove the jaw
(2) Disconnect the battery cables.
crusher.
(3) Refer to figure 2 and remove the
b. Installation
power unit.
(1) Refer to figure 4 and install the jaw
b. Installation
crusher.
(1) Refer to figure 2 and install the
(2) Install crusher hopper and walkway
power unit.
platform (Operator's Manual).
(2) Install the V-belts and adjust for
(3) Install crusher-to-power unit and
proper belt tension (Operator's Manual).
crusher-to-feeder countershaft drive belts. Ad-
Note. When making the belt tension adjustment
just for proper belt tension (Operator's Man-
be sure the power unit clutch drive shaft is parallel
ual).
with the jaw crusher eccentric shaft.
(4) Install inner belt and inner fly-
(3) Connect battery cables.
wheel guards (Operator's Manual).
Note. Connect negative (-) battery cable last.
(5) Install the crusher guard frame (Op-
(4) Connect fuel lines (Operator's Man-
erator's Manual).
ual).
(6) Install the front and rear counter-
(5) Connect clutch control universal
shaft drive guards (Operator's Manual).
joint (fig. 2).
(7) Install feeder clutch control (Oper-
ator's Manual).
25. Reciprocating Feeder
a. Removal
27. Delivery Conveyor
(1) Remove c o u n t e r s h a f t d r i v e r e a r
a. Removal
guard (Operator's Manual).
(1) Remove the front countershaft left
(2) Remove feeder drive belts (Opera-
hand guard frame (Operator's Manual).
tor's Manual).
(2) Remove the front countershaft right
(3) Refer to figure 3 and remove the
hand guard (Operator's Manual).
feeder and hopper complete with feeder
(3) Remove conveyor belt (Operator's
drive.
Manual).
b. Installation.
(4) Refer to figure 5 and remove the
(1) Refer to figure 3 and install the
speed reducer and conveyor head frame.
feeder and hopper complete with feeder drive.
(2) Install feeder drive belts and adjust
(5) Disconnect conveyor tail frame from
for proper belt tension (Operator's Manual).
the conveyor center support shown on figure
(3) Install countershaft drive rear guard
2.
(Operator's Manual).
(6) Refer to figure 6 and remove the
conveyor tail frame.
26. Jaw Crusher
(7) Remove conveyor hopper from jaw
a. Removal
crusher base as shown on figure 4.
(1) Remove feeder clutch control (Op-
b. Installation
erator's Manual).
(1) Install conveyor hopper to jaw
(2) Remove the front and rear counter-
crusher base as shown on figure 4.
shaft drive guards (Operator's Manual).
(2) Refer to figure 6 and install the con-
(3) Remove the crusher guard frame
veyor tail frame.
(Operator's Manual).
