3208 INDUSTRIAL AND MARINE ENGINES
DISASSEMBLY AND ASSEMBLY
OIL FILTER BASE AND ENGINE OIL COOLER
ASSEMBLE OIL FILTER BASE AND ENGINE
OIL COOLER (MARINE
ENGINE)
16-1306 & 1378
1. Install the valve, spring, cap and fitting (3) in
base (2).
2. Inspect the gasket that goes between the oil
filter base and the core. Install a new gasket if
needed.
NOTE: The gasket must be installed with point (5)
(indexing point) in the position shown.
3. Install the core in the base. Install nuts (1).
Tighten the nuts to a torque of 16 2 Ib.ft. (2.2
0.3 mkg).
4. Inspect the gasket that goes between the core
and cover (6). Install a new gasket if needed.
5. Put the cover in position on the base. Install
bolts (4).
end by:
a) install oil filter base and engine oil
cooler
42