Reassembly of Internal Gear and Hub
1. Position internal gear on hub, aligning matchmarks
made at disassembly. Secure with bolts and locking
plates and tighten to specified torque (Fig. 135).
Lockwire bolts in pairs.
NOTE: Some axles use bolts without locking plates,
with bolts inserted through internal gear and threaded
into hub.
FIG. 137
Reassembly of Brake Shoes
1. Install brake linings on brake shoes with washers and
nuts. Torque nuts to 200 to 220 in. lbs. (Fig. 138).
Tighten nuts in sequence shown in Fig. 139.
FIG. 135
2. Check that bearing seat on hub is free of nicks and
burrs. Press bearing cone on internal gear and hub
using bearing driver (Fig. 136). Bearing driver
dimensions are given in Fig. 137.
FIG. 138
FIG. 136
FIG. 139
43