DOZER PUMP:
REF.
REF.
NO.
DESCRIPTION
NO.
DESCRIPTION
Cover, Port End
Plug, Port
1
8
Seal, Ring
Cover, Shaft End
2
9
Bearing, Roller
Seal, Shaft Lip
3
10
Seal, Pocket
Gear, Driven
4
11
Plate, Thrust
Gear and Shaft, Drive
5
12
Seal, Gasket
6
13
Washer
Housing, Gear
7
14
Capscrew
1.
Place the pump in a vise with the drive
shaft pointing down. Do not grip on or near any
machined surfaces during disassembly or assembly.
Index mark all sections with a prick punch. Be sure to
align these marks when re- assembling.
2.
Remove the four cap screws (item 14) with
a socket wrench.
3.
Lift off the port end cover (item 1). If it is
necessary to pry it loose, be careful not to damage the
machined surfaces.
Pump Disassembly
Marking Sections
Port End Cover Removal
60-3.3