MAINTENANCE:
GENERAL:
CHECK FOR LOOSE NUTS AND BOLTS. Mounting
bolts, especially on such components as engine,
transmission, pump, steering gear and drive shafts will
occasionally work loose and may cause unnecessary wear
or even structural damage. Replace damaged or missing
fasteners and tighten loose bolts according to TORQUE
SPECIFICATIONS CHART.
Installing Filter Element
by-pass valve assembly and replace head with large coil
against filter head. Carefully place filter head and spring
in housing. Care should be taken that the spring Is sitting
properly on the by-pass valve. Install capscrews In filter
head and torque to 20 ft-lbs (2,8 m-kg).
CLEAN FILLER-BREATHER CAP every 200 hours.
Remove the hydraulic tank breather, located on the filler
Parking Brake Lever Adjustment
cap and wash In clean solvent. Blow dry and replace.
ADJUST PARKING BRAKE LEVER every 200 hours by
rotating lever handle for minor adjustments or by
adjusting parking brake cable.
Parking Brake Cable
Hydraulic Oil Filler Cap
Rev.760501
400-4.10
K300