Figure 11. Throttle control cables and tachometer drive, removal and installation.
e. Installation. Install the tachometer-hourmeter and drive on the instrument panel and engine in reverse of the
instructions on figures 11 and 12.
58. Fuel Gage
a.
Removal. Remove the fuel gage as instructed on figure 14.
b.
Cleaning and Inspection. Clean and inspect the fuel gage for damage. Replace a damaged gage.
c.
Installation. Install the fuel gage in reverse of instructions on figure 14.
59. Fuel Pumps
a.
Removal. Remove the fuel primer and secondary fuel filter as instructed on figure 15.
b.
Cleaning and Inspection. Clean and inspect all parts for damage. Replace if necessary.
c.
Installation.
(1)
Install the fuel primer and secondary fuel filter in reverse of instructions on figure 15.
(2)
Bleed the fuel system (TM 5-3820-205-10/2).
60. Air Cleaner Indicator
a.
Removal. Remove the air cleaner indicator as instructed on figure 16.
b. Cleaning and Inspection. Clean and inspect all parts. Inspect the air cleaner indicator for proper operation.
Replace damaged parts.
c.
Installation. Install the air cleaner indicator in reverse of instructions on figure 16.
AGO 8156A
26
