• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Table 1. Time Standards
Table 1. Time Standards - Continued

Maintenance Manual For Crusher, Roll: Diesel And Electric Driven, Wheel Mounted 75 Ton Per Hour - Vol1 Page Navigation
  1    2    3  4  5    6    7    8    9  
Table 1. Time Standards- Continued
Man-hours
Lubrication and service
06 ELECTRICAL SYSTEM-Continued.
0612 Batteries
0.3
Batteries----------------------------------------------------------------------------------------------------------------------
(Remove cover and add water to the batteries.)
11 REAR AXLE
1108 Walking Beams
0.2
Beam,
walking
-----------------------------------------------------------------------------------------------------------------
(Clean lubrication points and lubricate.)
12 BRAKES
1206 Mechanical Brake System
0.1
Slack
adjusters
----------------------------------------------------------------------------------------------------------------
(Clean lubrication points and lubricate.)
1208 Air Brake System
0.4
Filters,
air
----------------------------------------------------------------------------------------------------------------------
(Remove cover, remove filter, clean and replace, drain moisture,
replace plug and cover.)
0.1
Reservoir,
air
------------------------------------------------------------------------------------------------------------------
(Open drain cock and expel moisture from tank.)
13 WHEELS
1311 Wheel Assembly
0.6 (each)
Wheel
assembly
---------------------------------------------------------------------------------------------------------------
(Remove wheel and bearings, clean and lubricate bearings, replace
wheel.)
1313 Tires, Tubes
0.4 (all)
Time
-----------------------------------------------------------------------------------------------------------------------------
(Check tire pressure and inflate to proper pressure.)
15 FRAME, TOWING ATTACHMENTS
1503 Pintles and Towing Attachments
0.1
Pintle  hook  -------------------------------------------------------------------------------------------
(Clean lubrication points and lubricate.)
1506 Fifth Wheel
0.4
Fifth  wheel  assembly  ---------------------------------------------------------------------------------------------------------
(Clean lubrication points and lubricate.)
1507 Leveling Jacks
0.2 (all)
Jacks,
leveling
-----------------------------------------------------------------------------------------------------------------
(Clean and lubricate.)
40 ELECTRIC MOTOR
4000 Motor Assembly
0.2
Motor assemblies -------------------------------------------------------------------------------------
(Clean lubrication points and lubricate.)
75 CONVEYING; FEEDING; CRUSHING; AND SCREENING EQUIPMENT
7503 Drums, Pulleys, Sprockets
0.6
Bearings;  shafts;  drums  -----------------------------------------------------------------------------------------------------
(Clean lubrication points, and lubricate.)
7506 Shafts
0.1
Gear assembly, conveyor drive ----------------------------------------------------------------------
(Remove level and All plugs, check level, add lubricant as necessary,
replace plugs.)
7508 Elevating Wheel
0.4
Rollers
-----------------------------------------------------------------------------------------------
(Clean lubrication points and lubricate.)
0.1
Gear assembly ----------------------------------------------------------------------------------
(Remove level and fill plugs, check level, add lubricant as necessary,
replace plugs.)
AGO 8498A
6


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.