1
Bolt, machine, 1/4-28 x 13/8 in. (6 rqr)
11
Washer, lock, No. 8 (3 rqr)
2
Washer, key, 1/4 in. (6 rqr)
12
Washer, No. 8 (3 rqr)
3
End bell
13
Insulator plate
4
Nut, 1/2-13 x 7/16 in.
14
Brush holder plate
6
Washer, lock, 1/2% in.
15
Fiber washer, special
6
Nut, 1/2-13 x 5/16 in.
16
Insulator bushing
7
Washer, lock, 1/2 in.
17
Plug, pipe, 1/8-27
8
Washer, 1/2 in.
18
Felt strip
9
Insulator bowl
19
Expansion plug
10
Screw, machine, No. 8-32 x 1/2 in. (3 rqr)
20
Bushing
A--Commutator end frame.
1
Screw, machine, No. 8-32 x 1/4 in. (8 rqr)
11
Brush spring (6 rqr)
2
Brush (12 rqr)
12
Washer( lock, No. 10 (6 rqr)
8
Bolt, special (3 rqr)
13
Screw, machine, No. 10-32 x 5/8 in. (3 rqr)
4
Brush spring (6 rqr)
14
Washer, lock, No. 10 (6 rqr)
6
Washer, lock, No. 10 (6 rqr)
15
Brush holder (3 rqr)
6
Screw, machine, No. 10-32 x 3/8in. (3 rqr)
16
Spacer plate, 364 in. (3 rqr)
7
Washer, lock, No. 10 (6 rqr)
17
Insulator (3 rqr)
8
Brush holder (3 rqr)
18
Washer, fiber, No. 10 (12 rqr)
9
Spacer plate, 1/16 in. (3 rqr)
19
Brush plate
10
Bolt, special (8 rqr)
B-Brush and holder assembly.
1
Screw, cap, 1/4-28 x 1 1/16 in. (7 rqr)
7
Shift lever
2
Washer, key, ' in. (7 rqr)
8
Helical spring
3
Motor drive housing
9
Plug, pipe, 1/8-27
4
Screw, machine, A-20 x %e in. (4 rqr)
10
Felt strip
6
Washer, lock, 1/4 in. (4 rqr)
11
Sleeve bearing
6
Cover plate
C-Motor drive housing.
1
Thrust washer
10
Helical spring
2
Screw, 1/4-28 x 5/8 in.
11
Gear guide
3
Washer, lock, ET, % in.
12
Shift sleeve
4
Bolt, machine, A-20 x % in.
13
Washer, special
5
Washer, lock, ET, 1/4in. (3 rqr)
14
Flat washer, special
6
Armature
15
Plate
7
Pin, cotter. 0.090 x 1 1/4 in.
16
Sleeve bearing
8
Shaft collar
17
Plug, pipe, 1/8-27
9
Spur gear
18
Felt strip
D-Armature and drive housing.
I
Nut, plain, 1/2-13 x 7/16 in.
9
Flat washer, special
2
Washer, lock, 1/2 in.
10
Terminal stud insulator
3
Nut, plain, 1/2-13 x 5/16 in.
11
Screw, machine, 3/8-24 x 39/64 in. (12 rqr)
4
Washer, lock, 1/2 in.
12
Pole piece (6 rqr)
6
Washer, 1/2 in. (2 rqr)
13
Field winding insulator (3 rqr)
6
Washer, 1/2 in.
14
Starter motor field coil
7
Field terminal insulator
15
Starter frame
8
Terminal stud
E-Field coils. frame. and pole shoes.
Figure 13 - Continued.
compressed air. Remove all dirt and chips
54.
Starting Motor Assembly Cleaning,
from the commutator bars.
Inspection, Testing, and Repair
(2) Clean the brushes with a clean, dry cloth.
a. Cleaning.
Do not clean the brushes with solvent.
(1) Clean a dirty or discolored armature
(3) Clean the frame and field coils with a cloth
commutator with No. 00 sandpaper and
dampened with an approved 37
blow
out
sand
with
clean,
dry,
AGO 8456A
37
