TM 5-3820-233-12/1
n. Feeder Plate Clutch Controls. The feeder plate
hourmeter-tachometer on the rear of the engine. It is
used to increase and decrease the engine speed.
clutch controls are located on the operator walkway. The
k. Fuel Tank Gage. The fuel tank gage is located on
controls are used to operate the feeder plate.
o. Overspeed Governor.
The purpose of the
top of the fuel tank. It indicates the amount of fuel in the
tank. Capacity 70 gallons.
overspeed govenor is to prevent damage to the engine. It
l. Cold Weather Starting Aid. The cold weather
is electrically operated and designed to shut engine down
starting aid is located on the rear hood support behind
if engine RPM exceeds the governor speed. To restart
the air cleaner. It is used to inject ether into the air
engine after the governor has been activated, push reset
intake for cold weather starting of the engine.
button, located on the governor. The overspeed governor
m. Air Cleanser Indicator. The air cleaner indicator
is located on the power takeoff end of the engine and
electrically connected to the shut-down solenoid.
is located on the left hand side of the air cleaner. When
flag in indicator locks at top, cartridge must be changed.
Figure 2-13. Controls and instruments.
2-16
