TM 5-3820-233-12/1
Figure 4-68. Toggle plate position.
4-73. Base Toggle Seat
(4) Remove shims as necessary, push toggle
The base toggle seat sets firmly against the adjusting
seat forward and lower a light chain through shim slots
shim as in figure 4-69. It is held in position by two
and around toggle seat. Take up slack and snub to
supports which are bolted to the crusher base.
base.
a. Removal. Refer to figure 4-69 and remove the
(5) Remove bolts holding base toggle seat
base toggle seat as follows:
supports to base and remove support, allowing seat to
(1) Loosen nuts holding base toggle seat
slide out of position.
supports to the base.
(2) Remove tension spring (para 4-70).
(3) Disassemble toggle plate from crusher
4-66
