TM 5-3820-233-12/1
(6) Release chain slowly and lower toggle seat to
conveyor belt.
(3) Insert shims removed and reassemble
b. Installation.
tension spring assembly.
(4) Adjust crusher discharge opening (para 4-70)
(1) Engine bolt in tapped hole and lift toggle seat
and tighten tension springs.
into position. Attach wedge supports and remove chain
(5) Tighten bolts on base toggle seat support
used to lift toggle seat.
which holds seat in position.
(2) Reassemble toggle plate to crusher
Figure 4-69. Toggle seat and base toggle seat, removal and installation.
4-67
