TM 5-3820-233-12/2
b. Removal. Refer to figure 3-8 and remove the
d. Installation. Refer to figure 3-8 and install the
screens and frame.
frame and screens.
c. Inspection.
NOTE
(1) Inspect wire screen for wear. If necessary,
When installing clamp bar tighten evenly
replace screen.
from both sides at the same time. Always
(2) Inspect mounting hardware for damage or
replace bolts and washers that clamp center
missing parts.
of screen to frame.
(3) Inspect rubber channels for wear and
damage. Replace if necessary.
3-13
