3208 INDUSTRIAL AND MARINE ENGINES
DISASSEMBLY AND ASSEMBLY
CRANKSHAFT PULLEY
REMOVE CRANKSHAFT PULLEY (MARINE
ENGINE)
11-1205
Tools Needed
A
5F7465
Puller Assembly
1
8B7560
Step Plate
1
5M2894
Washer
1
S1590
Bolt
1
1. Remove drive belts (I).
2. Remove bolt (2) and washer (3).
3. Install tooling (A) on crankshaft pulley (4) and
remove the crankshaft pulley.
INSTALL CRANKSHAFT PULLEY (MARINE
ENGINE)
12-1205
Tools Needed
A
1F7464
Bolt 1 "-14 NF x 4" long
1
1. Put clean engine oil on the lip of the front
crankshaft seal and sealing surface of the
crankshaft pulley.
2. Put crankshaft pulley (1) in position on end of
crankshaft.
3. Install a standard washer and tool (A) in pulley
and tighten bolt until the pulley makes contact
with the crankshaft gear. Remove tool (A) and
the standard washer.
4. Install the original washer and bolt in the end of
the crankshaft. Tighten the bolt to a torque of
460 60 lb. ft. (63.6 8.3 mkg).
5. Install the drive belts. Make an adjustment to
the belt tension. See FAN AND ALTERNATOR
BELTS in LUBRICATION AND MAINTENANCE
75
GUIDE.