Figure 149
Figure 152
Install turbine to turbine shaft retainer ring.
Align holes in impeller cover with holes in impeller.
Install bolts and washers and tighten to specified torque.
Figure 110
Figure 153
If Impeller cover bearing was removed, press
Locate detent balls and springs In control valve. Position
bearing In position and secure with retainer ring.
new gasket. Secure valve with bolts and washers.
Tighten to specified torque.
Figure 154
Figure 151
Install pump drive sleeves.
Install a new Impeller cover "0" ring and grease
lightly to facilitate reassembly.
27