Disassembly of NoSPIN Differential
4.
Remove assembled driven clutch, spring retainer, and
1. Remove alternate differential case half bolts. Back
holdout ring from differential (Fig. 71).
off remaining bolts slowly and evenly, turning each a
few turns at a time (Fig. 68). This will release spring
load of NoSPIN unit.
5.
Remove spider from differential (Fig. 72).
2. Lift off differential case half to provide access to
NoSPIN unit (Fig. 69).
3. Remove side gear and spring from differential Fig. 70).
6.
Remove lower assembled driven clutch, spring
retainer, and holdout ring from differential Fig. 73).
27