BRAKE CONTROL
MAINTENANCE:
CHECK MASTER BRAKE CYLINDER FLUID LEVEL
every 50 hours by removing cover on rear floor plate.
Note: Use transmission fluid only [refer to LUBRICANTS
SPECIFICATION CHART].
Master Brake Cylinder Access
ADJUSTMENT can be made on the brake control lever by
adjusting the clevis and clevis lock nut.
MASTER BRAKE CYLINDER REMOVAL:
1. Park machine on level surface, set parking brake
and lower blade.
2. Remove rear floor plate.
3. Disconnect and cap transmission brake hose at
the master cylinder.
4. Disconnect brake pedal pushrod.
5. Remove master cylinder mounting bolts and
master brake cylinder.
6. Reverse procedure for installation.
Master Brake Cylinder Mounting
Rev. 760501
K300
70-1.1