128. Control Mechanism
b. Cleaning and Inspection. Clean and inspect all
parts.
Replace a defective or damaged part as
a. Removal.
necessary.
(1) Remove the control mechanism handle
c. Installation. Install the pushbutton switches on
from the control panel door as instructed
the control box in reverse of the instructions on figure
on figure 67.
(2) Remove the control mechanism from the
control panel box as instructed on figure
127. Connector Shell Assembly
b. Cleaning, Inspection, and Repair. Clean and
a. Removal.
Remove the connector shell
inspect. Replace or repair worn, damaged, or defective
assembly from the electric motor as instructed on figure
parts as necessary.
c. Installation.
b. Cleaning and Inspection. Clean and inspect all
(1) Install the control mechanism handle on
parts.
Replace a defective or damaged part as
the control panel door in reverse of the
necessary.
instructions on figure 67.
c. Installation. Install the connector shell assembly
(2) Install the control mechanism on the
on the electric motor in reverse of the instructions on
control panel box in reverse of the
instructions on figure 68.
Figure 64. Main power cable reel and bracket assembly, removal and installation.
AGO 8157A
93
