129. Magnetic Starter and Heater Assembly
130. Electric Motors
a. Removal. Remove the magnetic starter and
a. Removal. Remove the electric motors from the
heater assembly from the control box as instructed on
unit as instructed on figure 69.
b. Cleaning and Inspection. Clean and inspect all
b. Cleaning and Inspection. Clean and inspect all
parts.
Replace a defective or damaged part as
parts.
Replace a defective or damaged part as
necessary.
necessary.
c. Installation. Install the electric motors on the
c. Installation. Install the magnetic starter and
unit in reverse of the instructions on figure 69.
heater assembly on the control box in reverse of the
instructions on figure 68.
Section IV. AIR SYSTEM
131. General
132. Air Chambers
The air system consists of the hose, lines, valve,
a. Removal. Remove the air chambers from the
filters, chambers, and air tank. The air system is used
unit as instructed on figure 70.
to actuate the brakes when the roll crusher is being
towed from one location to another.
Figure 66. Pushbutton switches, removal and installation.
AGO 8157A
97