147. Pan Feeder Crankshaft
148. Pan Feeder and Rollers
a. Removal.
a. Removal.
(2) Remove the gear reducer assembly (para.
(1) Remove the pan feeder crankshaft (para.
147).
(1) Remove the gear reducer assembly from
(2) Remove the feeder pan and rollers from
the unit as instructed on figure 83.
the unit as instructed on figure 83.
b. Cleaning and Inspection. Clean and inspect all
b. Cleaning and Inspection. Clean and inspect all
parts.
Replace a defective or damaged part as
parts.
Replace a damaged or defective part as
necessary.
necessary.
c. Installation.
c. Installation.
(1) Install the pan feeder crankshaft on the
(1) Install the feeder pan and roller on the
unit in reverse of the instructions on figure
unit in reverse of the instructions on figure
(2) Install the gear reducer (para. 146).
(2) Install the pan feeder crankshaft (para.
147).
Figure 73. Air tank, removal and installation.
AGO 8157A
105
