Figure 60. Clearance light and electrical conduit, removal and installation.
128. Scalper Vibrating Screen Drive Motor and Belts
a. Removal.
(1) Remove the belt guard (TM 5-3820-205-10/2).
(2) Remove the scalper vibrating screen drive motor and belts as instructed on figure 63.
b. Cleaning and Inspection. Clean all parts and inspect for loose or missing hardware and damaged or
defective parts. Replace a defective part as necessary.
c. Installation.
(1) Install the scalper vibrating screen drive motor and belts in reverse of instructions on figure
63.
(2) Install the belt guard (TM 5-3820-205-10/2).
129. Discharge Conveyor Drive Motor and Belts
a. Removal. Remove the discharge conveyor drive motor and belts as instructed on figure 62.
b. Cleaning and Inspection. Clean all parts and inspect for loose or missing hardware, and damaged
or defective parts. Replace defective parts as necessary.
c. Installation. Install the discharge conveyor motor and drive belts in reverse of the instructions on
130. Magnetic Starter
a. Removal. Remove the magnetic starter as illustrated on figure 64.
b. Cleaning and Inspection. Clean all parts. Inspect heaters for burning, cracking, warping
AGO 8156A
83