Figure 61. Clearance light, exploded view.

Figure 61. Clearance light, exploded view.

or other damage. Replace a defective or damaged heater or magnetic starter if necessary.

c. Installation. Install the magnetic starter in reverse of instructions on figure 64.

131. Pushbutton Controls

a. Removal. Remove pushbutton controls as instructed on figure 65.

b. Cleaning and Inspection. Clean and inspect all parts. Replace a damaged or defective pushbutton

control if necessary.

c. Installation. Install the pushbutton controls in reverse of instructions on figure 65.

132. Power Cable

a. Removal. Remove the power cable from the cable reel (TM 5-3820-205-10/2).

b. Cleaning and Inspection. Clean and inspect the power cable for cut or deteriorated insulation,

breaks, damaged connectors, or other damage. Replace a defective or damaged power cable.

c. Installation. Install the power cable on cable reel (TM 5-3820-205-10/2).

133. Main Electrical Emergency Stop Control Button

a. Removal. Remove the main electrical emergency stop control button as instructed on figure 65.

b. Cleaning and Inspection. Clean and inspect all parts. Replace a defective or damaged part as

necessary.

c. Installation. Install the main electrical emergency stop control button in reverse of instructions on

AGO 8156A