TM 5-3820-233-35/1
(3) Reassemble the air inlet housing in
(2) Torque the blower to cylinder block
the reverse of the numerical sequence as il-
bolts to 55-60 foot-pound.
(3) Torque air inlet housing mounting
f. Installation
bolts to 16-20 foot-pound.
(1) Install the air inlet housing, blow-
er, and blower drive assembly in the reverse
(4) Reverse steps 1 through 6 under
of the numerical sequence as illustrated on
"Blower and Blower Drive Assembly Re-
figure 14-1.
moval".
3-19