3208 INDUSTRIAL AND MARINE ENGINES
DISASSEMBLY AND ASSEMBLY
GOVERNOR
DISASSEMBLE GOVERNOR
15-1264
start by:
a) separation of governor from fuel injection
pump housing
1. Remove the shaft (2) from the carrier (3).
2. Remove dowel (1) from the shaft (2).
3. Remove the weights (4) from the carrier (3)
by removing the dowels (5).
4. Remove the ring (10) from the thrust collar (6)1
5. Remove a race (9), a bearing (8), and a race
(7) from the thrust collar (6).
6. Remove the two bolts (12) that hold the
lever (14) to the shaft (13). Slide the shaft
(13) out of the governor housing and re-
move the lever (14) and the washers (11)
between the lever and the housing.
7. Remove the seal (15) from the governor housing.
32