3208 INDUSTRIAL AND MARINE ENGINES
DISASSEMBLY AND ASSEMBLY
FUEL INJECTION PUMP HOUSING
DISASSEMBLE FUEL INJECTION
PUMP HOUSING
15-1253
start by:
a) remove fuel injection pumps
b) separation of governor from fuel
injection pump housing
c) remove fuel transfer pump
1. Loosen the screws that hold the levers to
the shaft assembly.
2. Remove the screw (1) that holds the lever
assembly (2) to the shaft assembly.
3. Remove the shaft assembly (5) from the
housing and remove the levers (3) and lever
assembly (2).
4. Loosen the screws that hold the levers (6)
to the shaft.
5. Remove the screw that holds the lever (4)
to the shaft.
6. Remove the shaft (7) from the housing and
remove the levers.
7. Remove the lifter and roller assemblies (8)
from the housing with a magnet.
NOTE: Put identification on the lifters (10) and
rollers (9) for installation in their respective bores
in the housing.
34