5.
Install three mounting bolts in puller holes to pull
8.
Remove sun gear using suitable puller (Fig. 8).
planet carrier from hub assembly (Fig. 5).
9.
Some axle models have thrust ring pressed
6. Remove planetary assembly (Fig.
6).
lightly into end of spindle. If provided, use
Remove "O" ring from planetary assembly.
pry bar to remove thrust ring from end of
spindle (Fig. 9).
7.
Remove sun gear retaining ring (Fig. 7)1.
10.
Straighten tangs on nut lock as shown in Fig.
10.
16