TM 5-3820-205-10-1
Figure 10. Feeder jumper cable installed on reel.
Warning: Ensure that roll crusher and power source are properly grounded before connecting the
short main power cable to the power source. Death by electrocution could result from improperly
grounded equipment.
j. Connect the side conveyor cable and feeder jumper cable to the control panel, and connect the main power
cable to the control panel and main power source (figs. 11 and 12).
k. Connect the feeder jumper cable to the feeder motor (fig. 13).
I. Remove the feeder relief chute extension from stowed position (fig. 14). Install the feeder relief chute
extension on the feeder relief chute (fig. 15).
TA507883
12
