b. Cleaning and Inspection. Clean and inspect all
parts. Replace a damaged part as necessary.
a. Removal. Remove the primary and secondary
fuel filters from the engine as instructed on figure 13.
c. Installation.
b. Cleaning and Inspection. Clean and inspect all
(1) Install fuel tank and brackets on the unit in
parts. Replace damaged parts.
c. Installation. Install the primary and secondary
(2) Install the fuel tank cap and strainer (TM
fuel filters on the engine in reverse of the instructions on
5-8820-205-10/1).
64. Fuel Tank and Cap
65. Fuel Lines and Fittings
a. Removal.
a. Removal.
(1) Disconnect the fuel line from the fuel tank
(2) Remove the fuel tank cap and strainer
(TM 5-3820-205-10/1).
(2) Disconnect the fuel lines from the fuel
(3) Remove the fuel tank and brackets from
(3) Disconnect the fuel lines from the fuel
filters (para. 63).
Figure 21. Fuel tank and brackets, removal and installation.
AGO 8157A
40