Section XIII. LEVELING JACKS, TOOLBOX, AND FIRE EXTINGUISHER BRACKET
180. General
(2) Install the long ladder (para. 172).
The four screw-type jacks are mounted on the trailer
frame, two in rear of the trailer wheels and two in front
182. Leveling Jack
of the trailer wheels in rear of the frame gooseneck.
a. Removal. Remove the leveling jacks front the
The leveling jacks are used to level the roll crusher unit
unit as instructed oil figure 115.
during operations.
The toolbox and bracket are
b. Cleaning, Inspection, and Repair. Clean and
mounted on the left side of the trailer frame behind the
inspect. Replace or repair' worn, damaged, or defective
long ladder. The fire extinguisher bracket is mounted on
jack as necessary.
the right side of the vibrator screen frame.
c. Installation. Install the leveling jack on the unit
in reverse of the instructions on figure 115.
181. Toolbox
a. Removal
183. Fire Extinguisher Bracket
(1) Remove the long ladder (para. 172).
a. Removal.
(2) Remove the toolbox from the unit as
(1) Remove the fire extinguisher- from the
instructed on figure 114.
bracket.
b. Cleaning, Inspection, and Repair. Clean and
(2) Remove the fire extinguisher bracket from
inspect. Replace or repair worn, damaged, or defective
the unit as instructed on figure 116.
toolbox as necessary.
b. Cleaning and Inspection. Clean and inspect all
c. Installation.
parts. Replace a defective or damaged part.
(1) Install the toolbox on the unit in reverse of
the instructions on figure 114.
Figure 107. Rubber deflectors, removal and installation.
AGO8157A
140
