2 Serial Nos. 2090 through 2129
Figure 20--Continued.
c.
Installation.
(1) Install the ether starting aid lines on the intake manifold (par. 64).
(2) Install the ether starting aids and bracket in reverse of instructions on figure 22.
67.
Fuel Filters
a. Removal. Remove the primary and secondary fuel filters as instructed on figure 15.
b. Cleaning and Inspection. Clean and inspect all parts. Replace damaged parts.
c. Installation. Install the primary and secondary fuel filters in reverse of instruction on figure 15.
68.
Fuel Tank and Cap
a. Removal.
(1) Remove the fuel gage (par. 58).
(2) Remove the fuel tank cap and strainer (TM 5-3820-205-10/2).
(3) Remove the clearance marker light (par. 125).
(4) Remove the fuel tank and bracket as illustrated on figure 23.
b. Cleaning and Inspection. Clean and inspect all parts. Replace all damaged parts.
c. Installation.
(1) Install the fuel tank and brackets in reverse of instructions on figure 23.
AGO 8156A
36