A-Main conveyor belt troughing adjustment
Figure 85. Main conveyor belt, adjustment.
(2) Install drive gear reducer in reverse of instructions on figure 86.
(3) Install the main discharge conveyor drive belts (par. 129).
160. Head Belt Scraper Assembly
a. Removal. Remove the head belt scraper assembly as instructed on figure 87.
b. Disassembly. Disassemble the head belt scraper as illustrated on figure 88.
c. Cleaning, Inspection, and Repair. Clean and inspect all parts. Repair or replace defective or damaged parts as
necessary.
d. Reassembly. Reassemble the head belt scraper assembly as illustrated on figure 88.
e. Installation. Install the head belt scraper assembly in reverse of instructions on figure 87.
161. Tail Scraper Assembly
a. Removal. Remove the tail scraper assembly as instructed on figure 89.
b. Disassembly. Disassemble the tail scraper assembly as illustrated on figure 90.
c. Cleaning, Inspection, and Repair. Clean and inspect all parts. Repair or replace a defective or damaged part as
required.
d. Reassembly. Reassemble the tail scraper assembly as illustrated on figure 90.
e. Installation. Install the tail scraper assembly in reverse of instructions on figure 89.
AGO 8156A
109
