Figure 1-Continued.
(5) Adjust the main drive belt tension
31. Feeder Conveyor Assembly
(TM 5-3820-205-20/1).
a . Removal.
( 1 ) Remove the walkways (TM 5-3820-
30. Reciprocating Feeder Assembly
205-20/1).
a . Removal.
(2) Remove the feeder conveyor gear re-
(1) Disconnect the feeder jumper cable
ducer (TM 5-3820-205-20/1).
(TM 5-3820-205-10/1).
( 3 ) Remove the reciprocating feeder as-
(2) Refer to figure 3, and remove the re-
s e m b l y (par. 30).
c i p r o c a t i n g feeder assembly from the
(4) Refer to figure 4, and remove the
unit.
feeder conveyor assembly from the
unit.
b . Installation.
b . Installation
(1) Refer to figure 3, and install the re-
ciprocating feeder assembly on the
(1) Refer to figure 4, and install the feeder
unit.
conveyor assembly on the unit.
( 2 ) Install the feeder jumper cable (TM
( 2 ) Install the reciprocating feeder assem-
b l y (par. 30).
5-3820-205-10/l) .
AGO 8498A
21