Figure 2. Engine assembly, removal and installation.
(2) Remove the head and intermediate
tions of the feeder conveyor assembly
s e c t i o n s of feeder conveyor assembly
( p a r . 31).
( p a r . 31).
(4)
Install the chute. assembly and lower
( 3 ) Remove the drive belt guards and sup
screw hopper (TM 5-3820-205-
ports as instructed on figure 2.
20/1).
(4) Refer to figure 7, and remove the
vibrator screen assembly from the
35. Roll Crusher Assembly
unit.
a . Removal.
b . Installation.
(1) Remove the feeder conveyor assembly
(1) Refer to figure 7, and install the vibra-
( p a r . 31).
tor screen assembly on the unit.
( 2 ) Remove the vibrator screen assembly
( 2 ) Install the drive belt guards and sup
( p a r . 34).
ports as instructed on figure 2
(3) Remove the main drive belts (par.
(3) Install the intermediate and head sec-
29).
AGO 8498A
23