( 5 ) Remove the rotary elevator gear re-
d u c e r and motor (TM 5-3080-20-205-
20/1).
(6) Refer to figure 5, and remove the
rotary elevator assembly from the
unit.
b . Installation.
(1) Refer to figure 5, and Install the
rotary elevator on the unit.
( 2 ) Install the rotary elevator motor and
gear reducer (TM 5-3820-205-20/1).
(3) Install the under conveyor motor and
gear reducer (TM 5-3820-205-20/1).
(4) Install the main power cable reel (TM
5-3820-205-20/1)
(5) Install the fuel tank and brackets (TM
5-3820-205-20/1).
( 6 ) Install the feeder conveyor assembly
( p a r . 31).
33. Under Conveyor Assembly
a . Removal.
(1) Remove the rotary elevator assembly
F i g u r e 1 -Continued.
( p a r . 32).
(2) Remove the under conveyor belt (par.
( 3 ) Install the feeder conveyor gear re-
31).
ducer (TM 5-3820-205-20/1).
(3) Refer to figure 6, and remove the
(4) Install the walkways (TM 5-3820-
under conveyor assembly from the
205-20/1).
unit.
( 5 ) Adjust the feeder conveyor belt (TM
b . Installation.
(5-3820-205-20/1).
(1) Refer to figure 6, and install the under
32. Rotary Elevator Assembly
conveyor assembly on the unit.
a. Removal
( 2 ) Install the under conveyor belt (par.
31).
(1) Remove the feeder conveyor assembly
( 3 ) Install the rotary elevator assembly
( p a r . 31).
(par.32).
(2) Remove the feeder conveyor assembly
( 4 ) Adjust the under conveyor belt (TM
Note. after fuel tank removal, place
5-3820-205-20/1).
blocking between the under conveyor and
main frame.
34. Vibrator Screen Assembly
(3) Remove the main power cable reel
a . Removal.
(TM 5-3820-205-20/1).
(1) Remove the chute assembly and lower
( 4 ) Remove the under conveyor gear re-
ducer and motor (TM 5-3820-205-
screen hopper (TM 5-30820-205
20/1).
20/1).
AGO 8498A
22
