b. Install the reciprocating feeder assembly
b. Inspection. Inspect all parts for breaks,
( p a r . 30).
bends, wear, and other damage. Repair or re-
place damaged parts as necessary.
c. Install the feeder conveyor hopper liners
(TM 5-3820-205-20/1).
143. Feeder Conveyor Hopper Installation
a. Refer to figure 46, and install the feeder
conveyor hopper on the unit.
Section IV. FEEDER CONVEYOR FRAME ASSEMBLY
146. Feeder Conveyor Frame Assembly
1 4 4 . General
C l e a n i n g , Inspection, and Repair
The feeder conveyor frame assembly is a
a. Cleaning. Clean all parts with an ap-
three section metal frame that supports the
proved cleaning solvent.
f e e d e r conveyor belts, return rollers, pulleys,
b . I n s p e c t i o n a n d R e p a i r . Inspect all parts
and troughing rollers.
f o r cracks, breaks, or other damage. Repair or
replace all damaged parts as necessary.
145. Feeder Conveyor Frame Assembly
Removal
147. Feeder Conveyor Frame Assembly
Installation
a. Remove the feeder conveyor assembly
f r o m the crusher (par. 31).
a. Install the feeder conveyor belt rollers
(TM 5-3820-205-20/1).
b. Remove the feeder conveyor head and tail
b . Install the feeder conveyor hopper (par.
p u l l e y s (pars. 134 and 137).
143).
c. Remove the feeder conveyor hopper (par.
c . Install the feeder conveyor head and tail
141).
p u l l e y s (pars. 136 and 139).
d . Install the feeder conveyor assembly on
d . Remove the feeder conveyor belt rollers
t h e crusher (par. 31).
f r o m the frame (TM 5-3820-205-20/1),
Section V. FEEDER CONVEYOR ASSEMBLY MOTOR AND GEAR REDUCER ASSEMBLY
1 4 9 . Feeder Conveyor Assembly Motor
1 4 8 . General
The maintenance and repair instructions for
a. Feeder Conveyor Assembly Motor. The
the feeder conveyor assembly motor are identi-
f e e d e r conveyor assembly is driven by a 10-
cal to those of the reciprocating feeder motor.
horsepower electric motor energized by a mag-
R e f e r to paragraphs 118 through 120.
netic starter. The motor and starter operate
o n 208-220/440 volts. For tabulated data, re-
f e r to TM 5-3820-205-10/1.
150. Feeder Conveyor Gear Reducer
Assembly
b. Feeder Conveyor Gear Reducer Assembly.
The maintenance and repair instructions for
The feeder conveyor gear reducer is a double
the feeder conveyor gear reducer assembly are
reduction unit with a gear ratio of 15 to 1. It
i d e n t i c a l to those of the reciprocating feeder
t r a n s m i t s power from the motor to the feeder
gear reducer assembly. Refer to paragraphs
c o n v e y o r head pulley. For tabulated data, re-
122 through 124.
f e r to TM 5-3820-206-10/1.
AGO 8498A
