Figure 49. Under conveyor head pulley, removal and installation.
b . Disassembly. Disassemble the under con-
v e y o r head pulley in a similar manner to the
veyor head pulley in a manner similar to that
feeder conveyor head pulley (par. 136).
of the feeder conveyor head pulley (par. 134).
b. Installation.
(1) Refer to figure 49, and install the
156. Under Conveyor Head Pulley Cleaning,
under conveyor head pulley on the
I n s p e c t i o n , and Repair
unit.
Clean, inspect, and repair the under conveyor
( 2 ) Install the under conveyor belt (par.
head pulley in a similar manner as the feeder
132).
conveyor head pulley (par. 135).
( 3 ) Install the belt scraper (TM 5-3820-
157. Under Conveyor Head Pulley
205-20/1).
R e a s s e m b l y and Installation
(4) Install the rotary elevator assembly
a. Reassembly. Reassemble the under con-
( p a r . 32).
Section II. UNDER CONVEYOR HOPPER
1 5 8 . General
1 5 9 . Under Conveyor Hopper Removal
The under conveyor belt hopper is a metal
a. Remove the under conveyor hopper liners
f r a m e designed to keep the crushed materials
(TM 5-3820-205-20/1).
from falling over the sides and rear of the belt.
b. Remove the under conveyor belt (par.
It is mounted immediately above the conveyor
belt on the lower end of the conveyor frame.
130).
AGO 8498A
